We can supply a full-range of power transmission products like chains, sprockets and plate wheels, pulleys, gearboxes, motors, couplings, gears and racks pto shaft, agricultural gearboxes.
Overview
Quick Details
- After Warranty Service:
-
Video technical support
- Local Service Location:
-
Egypt
- ShowrooOur company is located in XiHu HangZhou Zhejiang Province. Tm Location:
-
Egypt
- Type:
-
parts
- After-sales Service Provided:
-
PTO Shaft A PTO Adapter will be useful when operating Victory’s EMSD and EMHD Embankment Flail mowers. The absence of a PTO Adapter could cause the PTO shaft to conflict with the arm weldment, which connects to the CAT I/II 3 point hitch.
Video technical support
Supply Ability
- Supply Ability:
- 500000 Piece/Pieces per Year
Packaging & Delivery
- Packaging Details
- Carton or Plywood case
- Port
- NINGBO/SHANGHAI, CHINA
-
Lead Time
: -
Quantity(Bags) 1 – 50 >50 Est. Time(days) 15 To be negotiated
Online Customization
TECHNICAL DATA
| TYPE | BM4-160 BM4S-160 BM4W-160 | BM4-200 BM4S-200 BM4W-200 | BM4-250 BM4S-250 BM4W-250 | BM4-320 BM4S-320 BM4W-320 | BM4-400 BM4S-400 BM4W-400 | BM4-500 BM4S-500 BM4W-500 | BM4-630 BM4S-630 BM4W-630 | BM4-725 BM4S-725 BM4W-725 | |
| Displacement(ml/r) | 158.8 | 200.8 | 252.2 | 317.5 | 401.6 | 535.3 | 630.5 | 728.6 | |
| Max.Pressure.Drop(Mpa) | cont. | 20 | 20 | 20 | 20 | 18 | 16 | 14 | 11.5 |
| int. | 24 | 24 | 24 | 24 | 21 | 18 | 16 | 13 | |
| peak. | 28 | 28 | 28 | 28 | 24 | 21 | 19 | 16 | |
| Max.torque(N.m) | cont. | 450 | 561 | 710 | 902 | 1008 | 1121 | 1124 | 1067 |
| int. | 559 | 714 | 883 | 1143 | 1255 | 1377 | 1317 | 1236 | |
| peak. | 663 | 818 | 1021 | 1322 | 1431 | 1598 | 1602 | 1559 | |
| Max.Aside from gear ratio, the most important factor that determines efficiency is the contact pattern between worm and mating gears. Manufacturing the reducer housing, and worm and gear subassemblies creates a stack up of tolerances, so the position of the gear-tooth centerline cannot be accurately predicted. Therefore, assemblers must manually measure and adjust the contact pattern by varying the position of shims behind the front and rear bearings on the output gear shaft. This is timeconsuming and costly, so most manufacturers use statistical analysis to predict shim quantity and location. This provides a reasonably centered contact pattern most of the time. Speed (cont.)(r/min) |
625 | 495 | 395 | 310 | 245 | 185 | 155 | 135 | |
| Max.Flow(cont.)(L.min) | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | |
| Max.Output.Power(cont.)(Kw) | 20.1 | 25.2 | 25.2 | 25.2 | 22 | 21 | 20 | 19 | |
| Weight(kg) | 20.3 | 20.8 | 21.4 | 22.4 | 23 | 24 | 25 | 26 | |
Intermittent operation the permissible values may occur for max.10% of every minute
Peak load:the permissible values may occur for max.1% of every minute
