Consisting of the pressure balanced gear pump, DC motor, multi-functional manifold, valves, tank, ect., this electrical power unit is intended to operate materials dealing with gear. The decreasing movement is achived from the solenoid valve together with the lowering velocity controlled by an adjustable needle valve. The left and suitable functions are equipped that has a dual pilot operated test valve and cross-over relief valves.
Remark: Please check with our sales engineer for that various pump displacement, motor electrical power or tank capacity.
1. This energy unit is of S3 duty cycle, i.e.,non-continuous operation,thirty seconds on and 270 seconds off.
2. Clean all the hydraulic components concerned prior to set up of the electrical power unit.
3. Viscosity from the hydraulic oil shoud be 15~46 cst, which should really also be clean and free of impurities.N46 hydraulic oil is advised.
four. This energy unit should be mounted horizontal.
five. Check the oil degree during the tank just after the primary start out of your power unit.
six. Oil shifting is required just after the original a hundred operation hours, afterwards the moment each and every 3000 hours.