DC MOTOR PUMP GROUP 1
Standard Description
Consisting of a hefty duty DC motor and also the CB1S gear pump, this pump motor group is surely an perfect hydraulic power unit for mobile hydraulic equipments, such as vehicle carriers, mobile aerial lifts, and backup techniques.
DC MOTOR PUMP GROUP 2
Standard Description
This motor pump includes 4.5″ DC motor, a CBSR gear pump with built-in relief valve and verify valve.
DC MOTOR PUMP GROUP three
Common Description
This motor pump consists of a four.5″ DC motor and also a CBSR gear pump that has a common power up/gravity down circuit which has a relief valve, a verify valve and also a solenoid release valve.
Special Notes
1. This electrical power unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
2. Clean all the hydraulic components concerned prior to mounting the power unit.
3. Viscosity on the hydraulic oil shoud be 15~68 cst, which need to also be clean and no cost of impurities. N46 hydraulic oil is advised.
four. The electrical power unit need to be mounted horizontally.
5. The relief valve pressure is preset about 25% greater compared to the working pressure.
6. Flow control valve for lowing velocity adjustment is available unpon request.